Qiagen QIAcuity 911000 User Manual page 133

2. To select the analysis type, click Target or Channel. If there are no reaction mixes available on
the plate, the Target button is disabled.
3. To analyze the plate by targets, select the targets from the Select Targets list. You can select
one or more targets from the list. To select all targets, click Select all.
4. Click Show results to view the results of the analysis.
5. To analyze the plate by channels, check the boxes of the corresponding channel color to
select the relevant channels. If images are not taken for a channel, the channel becomes
disabled.
6. Click Show results to view the results of the analysis.
The results are divided into several tabs. To view the contents of the tab, click the tab title.
Note: For the result analysis at least one well and a target or channel must be selected.
QIAcuity User Manual 07/2020 133