Qiagen QIAcuity 911000 User Manual page 154

The replicate results are shown in one row per replicate group. Individual replicate results are
not available. The checkbox which allows the user to show mean values for replicates is
checked and disabled.
To export the list view information as .csv file, click Export CSV.
Note: Creating a report for this plate, the result list is automatically included in this report as soon
as at least one dedicated diagram for mutation detection (heatmap, point diagram, Concentration
diagram) is selected to be included. For more information on reports see Reports.
Heatmap tab for mutation detection
The Heatmap tab contains a heatmap that shows the mutant fraction as percentage in each of the
wells. If a well is not selected as a source for the analysis, the value is not displayed on the heatmap
and its background color is gray.
To view an additional toolbar that enables actions related to the diagram, such as downloading
the plot, hold the pointer over the diagram. For more details about the toolbar, refer to section
Diagram options.
To view detailed information about a well, point the cursor over the well. A tooltip with detailed
information opens.
To view the mean values for replicates in multiplex tests, click Show mean values for replicates. For
simplex tests the mean values view is always shown for replicates and cannot be disabled.
QIAcuity User Manual 07/2020 154