Qiagen QIAcuity 911000 User Manual page 110

Adding controls to the plate
1. On a marked well, click the
Note: You can also mark more than one well if you want to assign a control to multiple wells.
2. Click Add control.
The Add Control window appears.
3. Select the control you want to add to the plate from the Controls list or enter a new control
name.
4. In the Control type list, select whether the control is positive or negative for the specific target.
5. Click Assign.
The control is added and the well is marked with a C.
Note: To edit or remove the control from the well, right-click the well and select Edit control or
Remove control. You can also remove the control from the well by clicking the
select Remove control. To remove the control and the reaction mix from the well, select Clear
well.
QIAcuity User Manual 07/2020
icon or right-click the well.
icon and
110