Synchronizing labware with the QIAcuity Software Suite
Information about the labware used by the QIAcuity can be downloaded from the Software Suite.
The labware data is synchronized automatically when the instrument is turned on. You can also
synchronize it manually by clicking Tools and selecting Labware Sync. The labware is then
downloaded and updated.
Note: Only administrators can synchronize labware.
Note: The connection between the QIAcuity and the Software Suite must be configured before
starting this procedure. For more information on how to set up the connection, refer to section
Establishing a connection between the QIAcuity instrument and the QIAcuity Software Suite.
To download labware information from the Software Suite, follow the steps below.
1. On the toolbar, tap Tools.
2. Tap Servicing.
QIAcuity User Manual 07/2020
66