Qiagen QIAcuity 911000 User Manual page 76

4b. In the Duration field, enter the cycling duration for the plate.
4c. Tap Add temperature step.
5. If you want to modify the temperature steps, refer to these steps:
To edit or delete a temperature step, tap the More

To group the temperature steps, check the corresponding boxes of more than one

temperature step, then tap Group.
To ungroup a group of temperature steps, tap the More

6. Perform the following steps in the Imaging tab:
QIAcuity User Manual 07/2020
icon, then tap Edit or Delete.
icon, then tap Ungroup.
76