7. Select Use the following IP address. Enter the following information:
IP address: Enter 192.168.1.1.
Subnet mask: Enter 255.255.255.0.
Default gateway: Enter 192.168.1.254.
Preferred DNS server: Enter the DNS server address.
Alternative DNS server: Enter the alternative DNS server address.
Note: If the Preferred DNS server and Alternative DNS server fields are left blank, the
connected is showed as unknown.
8. Click OK, then click Close.
Optional: You can check if the addresses have been assigned properly by following the steps
below.
1. From your Home screen, click the Search icon. Enter cmd and press the Enter key.
2. Wait for the command line window to open. Enter ipconfig.
Address should be visible under the ethernet interface name for which modifications were
made.
QIAcuity User Manual 07/2020
49