Qiagen QIAcuity 911000 User Manual page 111

Adding NTCs to the plate
1. On a marked well, left-click the
Note: You can also mark more than one well if you want to assign a Non-Template Control to
multiple wells.
2. Click Add NTC.
The Add Non-Template Control window appears.
2. Select an existing NTC from the Non-Template Control name list or enter a new Non Template
Control name.
3. Click Assign.
The NTC is added and the well is marked with NTC.
Note: To edit or remove the NTC from the well, right-click the well and select Edit
NTC or Remove NTC. You can also remove the control from the well by clicking the
QIAcuity User Manual 07/2020
icon or right-click the well.
icon
111