The update files are copied from the USB drive to the instrument's internal drive. The status of
the file copying process is shown on the screen.
Note: If an error occurs when the files are being copied, an error message is shown on the
screen. Tap Cancel to stop the process. Remove the USB drive and tap Reboot to restart the
instrument. If the QIAcuity does not function after an unsuccessful software update, contact
QIAGEN Technical Services.
5. After the software update files are copied, tap Reboot to restart the instrument.
The QIAcuity restarts and installs the software update.
QIAcuity User Manual 07/2020
65