Qiagen QIAcuity 911000 User Manual page 166

Note: If the selected analysis source contains replicates of the reference sample, your results can be
calculated only by using mean results for replicates. In this case the "Show mean values for
replicates" check box is marked and can't be changed. In this case there is a warning message
above the table and when the user hover on the checkbox, a tooltip appears to inform the user that
selected analysis source contains replicates of the reference sample and result is calculated only by
using mean results for replicates. Note: When creating a report for this plate, the result list is
automatically included in the report as soon as at least one dedicated diagram for copy number
variation (heatmap, point diagram, Concentration diagram) is selected to be included. For more
information on reports see section Reports.
To export the results of the list view to an CSV file, click Export to CSV.
Heatmap tab for copy number variation
The Heatmap tab contains a heatmap that shows the number of copies per genome in each of the
wells. If a well is not selected as a source for the analysis, the value is not displayed on the heatmap
and its background color is gray.
To view an additional toolbar that enables actions related to the diagram, such as downloading
the plot, hold the pointer over the diagram. For more details about the toolbar, refer to Diagram
options.
To view detailed information about a particular well, point the cursor over the well. A tooltip with
detailed information opens.
To view the mean values for replicates in multiplex tests, click Show mean values for replicates. For
simplex tests the mean values view is always shown for replicates and cannot be disabled.
Note: If the selected analysis source contains replicates of the reference sample, your results can be
calculated only by using mean results for replicates. In this case the "Show mean values for
replicates" checkbox is marked and can't be changed. When the user hover on the checkbox, a
tooltip appears to inform the user that selected analysis source contains replicates of the reference
sample and result is calculated only by using mean results for replicates.
QIAcuity User Manual 07/2020 166