Area Code Configuration - Yealink VP59 Administrator's Manual

Administrator's Guide for VP59/SIP-T58A/CP960 IP Phones
Default 1
Web UI Features > General Information > Time Out for Dial Now Rule
Parameter dialplan_dialnow.url
It configures the access URL of the dial now template file.
For customizing dial now template file, refer to
Description
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
String within 511 characters
Values
Default
Blank
Parameter dialplan.transfer.mode
It configures the transfer type the phone will perform when the entered transferee numbers match the
Description
Dial Now rule of the dial plan or the predefined string of the digit map.
0-Semi-attended Transfer/Attended Transfer
Permitted
Values
1-Blind Transfer
Default
0
dialplan.dialnow.rule.X
Related
dialplan.digitmap.string
Parameters
account.X.dialplan.digitmap.string
[1]
X is from 1 to 100.

Area Code Configuration

The following table lists the parameters you can use to configure the area code.
Parameter dialplan.area_code.code
It configures the area code to be added before the entered numbers when dialing out.
Note: The length of the entered number must be between the minimum length configured by the para-
Description
meter "dialplan.area_code.min_len" and the maximum length configured by the parameter "dial-
plan.area_code.max_len". It works only if "dialplan.digitmap.enable" and
"account.X.dialplan.digitmap.enable" are set to 0 (Disabled).
Permitted
String within 16 characters
Values
Default Blank
Web UI Settings > Dial Plan > Area Code > Code
Parameter dialplan.area_code.min_len
It configures the minimum length of the entered number.
Description
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
Integer from 1 to 15
Values
Default 1
326
<y0000000000xx>.cfg
Dial Now File Customization.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg