Dhcp Server; Pbxware Version; Installation; Power Adapter - Yealink CP935W Configuration Manual

DHCP server

Fully configured and operational DHCP server.

PBXware version

PBXware version 6.6.1
In order to find out the PBXware version:
Login to PBXware
Navigate to Settings: About.
On the top of About page is a code similar to this one PBXware Edition: Business, Release:
6.6 (387597b7), Running: 16.16.1-gc-c0d40968, PBXware Proxy v6.6 (7009484), API: 6,
libmemcached version: 1.0.14, where Release denotes the exact version of your PBXware.

Installation

This chapter describes how to install and connect the phone to the electrical power and data
network as well as how to apply factory settings.
The following topics are covered:

Power adapter

Factory Settings
Power adapter
Connect the Network and Power
Connect the charging cradle to the phone to charge the CP935W device.
Yealink CP935W is a wireless touch-sensitive HD conference phone, you can register a SIP
account directly through Wi-Fi.

Find the phone IP address

Find out your Yealink phone IP Address.
Go to More.
Select Status.
Select General.
The IP address will be displayed on the top of display.

Reset to factory settings

This step is not required for brand new out-of-the-box phones, however, if the phone has been
already used then it is a must.