Disabling Idle Clock Display; Setting Time & Date Manually; Changing The Time & Date Format - Yealink T54W User Manual

6.7.1 Disabling Idle Clock Display

You can disable the idle clock display, so that the time and date is displayed in the status bar.
It is only available for the T54W phones.
Figure 33. T54W Idle Clock Display
Procedure
1. Navigate to Menu > Basic > Display > Idle Clock.
2. Select Disabled from the Idle Clock Display field.
3. Select Save.
6.7.2 Setting Time & Date Manually
If your phone cannot obtain the time and date automatically, you can set it manually.
Procedure
Navigate to Menu > Basic > Time & Date > General > Manual Settings.
1.
On the T57W phones, navigate to Menu > Basic > Time & Date > General. Then select
•
Manual Settings from the Type drop-down menu.
Edit the date and time.
2.
Select Save.
3.
The time and date set on the phone will be changed accordingly.
Note: After the phone reboots, it will be forcibly switched to obtain the time & date from the
NTP server.
6.7.3 Changing the Time & Date Format
You can set the phone to display the time in 12-hour format or 24-hour format. You can also
change the date format, including the options to display the day (D), month (M), and year (Y).
Note: Your system administrator can customize the date format.
Procedure
1. Navigate to Menu > Basic > Time & Date > Time & Date Format.
2. Select the desired time format or date format.
3. Select Save.
MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
87