Idle Clock Display - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
Select the desired value from the pull-down list of Backlight Time(seconds).
4.
Click Confirm to accept the change.
5.
To configure the backlight via phone user interface:
Press Menu->Basic->Display->Backlight.
1.
Press
2.
field.
Press
3.
Level field.
Press
4.
Time field.
Press the Save soft key to accept the change.
5.

Idle Clock Display

Idle clock is displayed on the center of the idle screen by default. You can hide the idle clock,
and the time and date are displayed on the right of the status bar. It is only applicable to
SIP-T54S IP phones.
Procedure
Idle clock can be configured using the following methods.
Central Provisioning
(Configuration File)
Phone User Interface
Details of Configuration Parameter:
phone_setting.idle_clock_display.enable
178
or , or the Switch soft key to select the desired level from the Active Level
or , or the Switch soft key to select the desired value from the Inactive
or , or the Switch soft key to select the desired time from the Backlight
<y0000000000xx>.cfg
Parameter
Configure the idle clock.
Parameter:
phone_setting.idle_clock_display.enable
Configure the idle clock.
Permitted Values
0 or 1
Default
1