Vq-Rtcpxr Display Configuration - Yealink SIP-T2 Administrator's Manual

Note
: You can configure the softkey layout feature to display the
RTP Status
press the soft key to check the voice quality data with different parties. For more information, refer to
Layout
.
Topic

VQ-RTCPXR Display Configuration

VQ-RTCPXR Display Configuration
The following table lists the parameters you can use to configure VQ-RTCPXR display.
Parameter phone_setting.vq_rtcpxr.states_show_on_web.enable
It enables or disables the voice quality data of the last call to be displayed on the web interface at the
Description
path Status > RTP Status.
Permitted 0-Disabled
Values 1-Enabled
Default 0
Web UI Settings > Voice Monitoring > Display Report Options on Web
Parameter phone_setting.vq_rtcpxr.states_show_on_gui.enable
It enables or disables the voice quality data of the last call or current call to be displayed on the
phone screen. You can view the voice quality data of the last call on the phone at the path Menu >
Description
Status > More > RTP (RTP Status). You can view the voice quality data of the current call by press-
ing RTP/RTP Status soft key during a call.
Permitted 0-Disabled
1-Enabled
Values
Default 0
Web UI
Settings > Voice Monitoring > Display Report Options on Phone
Parameter phone_setting.vq_rtcpxr_display_start_time.enable
It enables or disables the phone to display Start Time on the phone screen.
Description
Note: It works only if "phone_setting.vq_rtcpxr.states_show_on_gui.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default 1
Web UI Settings > Voice Monitoring > Report Options on Phone > Start Time
Parameter phone_setting.vq_rtcpxr_display_stop_time.enable
It enables or disables the phone to display Current Time or Stop Time on the phone screen.
Description
Note: It works only if "phone_setting.vq_rtcpxr.states_show_on_gui.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default 1
Web UI Settings > Voice Monitoring > Report Options on Phone > Current Time
Parameter phone_setting.vq_rtcpxr_display_local_call_id.enable
Description It enables or disables the phone to display Local User on the phone screen.
RTP Status
soft key during the conference. Then you can
Audio Features
Softkey
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
188