Create 'Site' Based On An Existing Configuration - Siemens FS720 Configuration
Fire detection system
Hide thumbs
Also See for FS720:
- Mounting & installation (248 pages) ,
- Commissioning, maintenance, troubleshooting (178 pages) ,
- Quick reference for components / pin assignment (130 pages)
Table of Contents
Advertisement
6.1.2 Create 'Site' based on an existing configuration
Building Technologies
Fire Safety
NOTICE
Unauthorized characters in the ↑ 'Site' name or in the path: < > / \ | : ? * " % #
'Site' may not be able to be saved or loaded.
●
Do not use any of the following characters in the 'Site' name or in the path:
< > / \ | : ? * " % #
w The configuration file to be copied is available on the PC.
w The configuration file has the '.fsc' extension.
1. Select 'File' > 'New site' from the menu bar or click on the following button in
the toolbar:
a The 'Create new site' window opens.
2. Select the 'Create based on existing configuration' option.
3. Select the configuration file to be copied from 'Existing configuration:'.
4. Click on 'Next'.
a The configuration file is copied.
a The 'Site properties' window opens.
5. Enter the required information, e.g. the 'Site' name.
6. Click on 'OK'.
a The 'Site' is created.
See also
2 Editing 'site' properties [➙ 65]
Program operation
6
Creating a site
63 | 412
A6V10210424_j_en_--
2018-08-29
Advertisement
Table of Contents
