Siemens FS20 Application Manual
Fire detection system, external printer
Hide thumbs
Also See for FS20:
- Mounting & installation (354 pages) ,
- Planning manual (242 pages) ,
- Commissioning, maintenance, troubleshooting (188 pages)
Related Manuals for Siemens FS20
Summary of Contents for Siemens FS20
- Page 1 FS20/FS720 Fire detection system External printer Application Guide Building Technologies A6V10224853_c_en_-- 03.04.2012 Control Products and Systems...
- Page 2 Legal notice Technical specifications and availability subject to change without notice. © 2012 Copyright by Siemens Switzerland Ltd Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited.
-
Page 3: Table Of Contents
Table of contents About this document ..................5 Applicable documents ..................6 History of changes ....................7 System requirements ..................8 Overview ......................9 Connection to RS232 interface ..............10 Connection to Ethernet via print server PS01a ........... 11 Information about commissioning ............... 13 Configuration with SintesoWorks/Cerberus Engineering Tool ....14 Configuring print server ................ - Page 4 Building Technologies A6V10224853_c_en_-- Fire Safety 03.04.2012...
-
Page 5: About This Document
This document contains information relating to application and should be given to the technical personnel to assist them in connecting an external printer in the FS20/FS720 fire detection system. Use of a printer recommended by Siemens is described in the document by way of example. -
Page 6: Applicable Documents
Supplementary information and tips The 'i' symbol identifies supplementary information and tips for an easier way of working. 1.1 Applicable documents Document ID Title 008851 FS20 Fire Detection System, Installation 009078 FS20 Fire Detection System, Configuration 009052 FS20 Fire Detection System... -
Page 7: History Of Changes
About this document History of changes 1.2 History of changes The reference document's modification index applies to all languages into which the reference document is translated. The first edition of a language version or a country variant may for example have the modification index 'd' instead of 'a' if the reference document already has this modification index. -
Page 8: System Requirements
System requirements 2 System requirements An external printer in the FS20/FS720 fire detection system must satisfy the following requirements: Compatible with IBM ProPrint format Compatible with the ISO character sets required in the country in question and supported by the system, for example with the following: –... -
Page 9: Overview
Overview 3 Overview One external printer can be connected per station in the FS20/FS720 fire detection system. Visibility The 'visibility' of the printer can be configured individually in SintesoWorks/Cerberus Engineering Tool, according to the 'visibility concept'. Building Technologies A6V10224853_c_en_-- Fire Safety... -
Page 10: Connection To Rs232 Interface
An external printer is created in SintesoWorks/Cerberus Engineering Tool for this station. The connection cable is wired following the connection diagram. The shielding to the connector housing and FS20/FS720 housing offers EMC protection (C). The connection cable with 25-pole connector (B, see below) is connected to the printer. -
Page 11: Connection To Ethernet Via Print Server Ps01A
Connection to Ethernet via print server PS01a 5 Connection to Ethernet via print server PS01a A print server is used for the connection to the Ethernet. Ethernet FC20x0 FT2040 Print server PS01a FUJITSU DL3750+ Printer connection to Ethernet via print server Building Technologies A6V10224853_c_en_-- Fire Safety... - Page 12 Connection to Ethernet via print server PS01a Preconditions for connection An external printer is created in SintesoWorks/Cerberus Engineering Tool for one station. The print server PS01a is configured with the settings needed for the network. Print server PS01a is connected to the power supply and Ethernet. The connection cable has a 9-pole socket and 25-pole connector.
-
Page 13: Information About Commissioning
An external printer is commissioned in three or four stages: Satisfy hardware conditions for the corresponding connection Configuration of an external printer in the FS20/FS720 fire detection system with SintesoWorks/Cerberus Engineering Tool Configure print server if the printer is connected to the Ethernet Commissioning external printer Note the product documentation provided in the scope of supply. -
Page 14: Configuration With Sintesoworks/Cerberus Engineering Tool
The 'external printer' element is created in SintesoWorks/Cerberus Engineering Tool. The document 'Configuration' in the FS20/FS720 documentation includes how to create an 'external printer' element in the FS20/FS720 fire detection system. 1. Create an 'external printer' element in the 'Operation' register. 2. Define the 'visibility' for the printer. -
Page 15: Configuring Print Server
Configuring print server 8 Configuring print server The print server's IP address must be in the corresponding address range of the Ethernet (system) and is defined on the print server. The print server must be configured before connecting to the Ethernet (system). Settings on the print server Subnet screen 255.255.255.0 (basic setting) IP address for print server PS01a in the range between 192.168.200.6 and... -
Page 16: Commissioning External Printer
Commissioning external printer 9 Commissioning external printer The external printer FUJITSU DL3750+ can be installed and commissioned following the operation manual. The operation manual can be found on the CD supplied with the printer. Printing status report Print out the 'Setup Parameters' status report and compare it with the settings required. - Page 17 Commissioning external printer 3. Use the <LF/FF> or <LOAD> keys under the text 'LIST' to move the cursor. 4. To select, press <MENU>. The 'SETUP Parameters' status report is printed. Switching ONLINE 1. Use <LF/FF> or <LOAD> keys under the text 'SAVE & END' to move the cursor.
- Page 18 Commissioning external printer Function Value MENU 2 EMULATE DPL24C+ FONT COUR 10 QUALITY LETTER PITCH 10 CPI LINE SP 6 LPI CHAR-W NORMAL CHAR-H NORMAL ATTRIB NONE PAGE LG 11.0 IN LFT-END 1 COLM TOP-MRG 1 LINE LANGUAGE PAGE437 CHR-SET SET2 PRF-SKP NO-SKIP...
- Page 19 Commissioning external printer Function Value ADJUST CNT-ORG 1 /6 IN CNTFINE 1 /180 CUT-ORG 1 /6 IN CUTFINE 1 /180 CNT-LFT 0 /90 CUT-LFT 0 /90 CUT-ADJ 0 /360 CNT-ADJ 0 /360 CNTADJL 0 /360 ==END== CONFIG TEAROFF AUTO TEARPOS VISIBLE TEAR-EN 4 SEC...
- Page 20 Commissioning external printer Changing status settings Change the settings as follows: 1. Press <ONLINE>. The 'ONLINE' LED goes out and the printer is OFFLINE. 2. Press <TEAR OFF> and <ONLINE> at the same time. The 'OFFLINE SETUP MODE' report is printed. Printer keys HARDWRE Cursor...
- Page 21 Commissioning external printer 5. Use <LF/FF> or <LOAD> keys under the value you require (see table) to move the cursor. 6. Press <MENU>. The setting selected is fixed and the next setting printed. 7. Proceed as described here for the other selections. 8.
-
Page 22: List Of Items
List of items 10 List of items Item Manufacturer Printer Fujistu DL3750+ Fujitsu Siemens item number: A5Q00023962 RS232 module FCA2001-A1 Siemens Siemens item number: A5Q00005327 Print server PS01a: M04120 http://www.seh.de Connector, 25-pole, shielded DB-25, male: ISO 2110 e.g.: housing 3357-6225-1C... - Page 23 List of items Building Technologies A6V10224853_c_en_-- Fire Safety 03.04.2012...
- Page 24 Issued by © 2006-2012 Copyright Siemens Switzerland Ltd Siemens Switzerland Ltd Technical specifications and availability subject to change without notice. Infrastructure & Cities Sector Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41-724 24 24 www.siemens.com/buildingtechnologies Document ID...