Siemens FS720 Configuration page 56

GUI
5
Error indication and problem identification
56 | 412
Building Technologies
Fire Safety
Displaying the 'Error' for one element
Read the information in the status bar at the bottom edge of the program
l
window and / or click on the information in the status bar.
Or
1. Right-click on an element with a red or yellow exclamation mark.
2. In the shortcut menu, select the 'Show problems' menu item.
Or
1. Highlight an element with red or green exclamation mark.
2. Select 'View' > 'Show problems' from the menu bar.
a The 'Problems' window opens.
a In the 'Problems' window, an 'Error', 'Warning', or 'Info' entry concerning the
element selected is displayed.
If the highlighted element has only one problem, then the problem will be
described in the status bar. If the element has several problems, then the number
of problems will be displayed in the status bar.
Figure 11: Status bar with problem description
Figure 12: Status bar with number of problems
A6V10210424_j_en_--
2018-08-29