Navigating Within The Program Window; Navigating With Task Cards; Navigating With Hyperlinks - Siemens FS720 Configuration

5.11 Navigating within the program window

5.11.1 Navigating with task cards

5.11.2 Navigating with hyperlinks

Building Technologies
Fire Safety
Navigation in the program window functions according to the Windows standard.
Navigation between the task cards or the perspectives of a ↑ 'Site' is specific to
Cerberus-Engineering-Tool. Opening a perspective or changing from one
perspective to the other is possible using the following control elements:
● Task cards
● Hyperlinks
● Shortcuts
You will find information on operating elements in the following chapters.
Click on a task card to switch to the corresponding perspective.
Figure 8: Task cards
See also
2 Overview of the program window [➙ 44]
You can use hyperlinks to navigate between the task cards. If an element is
assigned, the ↑ link is indicated by a hyperlink in the bottom part of the detail
editor. The view changes to the assigned element when you click on a hyperlink.
Figure 9: Detail editor with hyperlink
See also
2 Overview of the program window [➙ 44]
Navigating within the program window
GUI
5
53 | 412
A6V10210424_j_en_--
2018-08-29