Siemens FS720 Configuration page 321

Building Technologies
Fire Safety
Configuring remote access via cRSP
1. Configure one ↑ 'Station' as ↑ 'GAP' or 'Secondary GAP'. Link [➙ 314]
2. In 'GAP' or 'Secondary GAP', create a 'Route' element.
3. In the 'Route' element, enter the values for 'Destination address', 'Netmask' and
'Gateway'. You will get the values from your cRSP contact.
4. In 'Ethernet sub-net' create a 'Route' element.
5. In the 'Route' element, enter the values for 'Destination address' and 'Netmask'.
You will get the values from your cRSP contact.
– Enter the Ethernet address of the GAP as the value of 'Gateway'.
You will find information on entering routes in chapter 'Entering routes for external
access to extended networks via GAP [➙ 317]'.
Establishing connection
1. Log in on the cRSP website.
2. Establish the FS720 connection to your ↑ 'Site' (VPN tunnel).
3. Select the 'Connection to IP address' option in the 'Connect' window.
4. Enter 'localhost' or '127.0.0.1'.
5. Click on 'OK'.
'Network' task card
14
Network configuration
321 | 412
A6V10210424_j_en_--
2018-08-29