Configuring Cloud Gateway Fg2004 - Siemens FS720 Configuration

'Network' task card
14
Network configuration

14.2.10 Configuring cloud gateway FG2004

322 | 412
Building Technologies
Fire Safety
The cloud gateway FG2004 is networked with the stations of an FS720 system via
Ethernet and enables connection to a cloud.
You will find information on setting a station up as a router in chapter 'Configuring a
'Station' as a router station [➙ 313]'.
You will find more information on networking the stations via Ethernet or via C-
WEB/SAFEDLINK in the documents 'A6V10210355' and 'A6V10210362'. See
chapter 'Applicable documents'.
w An 'Site' element is created in the 'Cerberus-Engineering-Tool'.
w At least one station with a 'PMI' element is created within the 'Site' element.
1. Create an 'Ethernet station' of type 'FG2004' in the 'Hardware' task card.
a The Engineering Tool creates the cloud gateway FG2004 as a separate
station.
2. Highlight the 'FG2004' element in the 'Hardware' task card.
3. Assign the required IP address to the 'FG2004' element in the 'Network' tab
under 'IP address'. Information: All setting options in the other tabs of the detail
editor have no influence on the behavior of the cloud gateway FG2004.
4. Go to the 'Operation' task card.
5. Highlight the following element in the Station that needs to have visibility of the
FG2004 Station: 'PMI' > 'Standard visibility'
A6V10210424_j_en_--
2018-08-29