Configuring Permanent Access For Cerberus-Remote; Onboard I/Os - Siemens FS720 Configuration

Fire detection system
Table of Contents

Advertisement

10.1.2 Configuring permanent access for Cerberus-Remote

10.2 Onboard I/Os

Building Technologies
Fire Safety
Permanent access has to be configured for each ↑ 'Station' of the ↑ 'Site'.
Configuring permanent access means that access at the 'Station' is not required.
You will find more information on the Cerberus-Remote operation modes in
chapter 'Cerberus Remote [➙ 57]'.
Configuring permanent access
1. Select the 'Hardware' task card.
2. Select the 'Station' for which you wish to configure permanent access for
Cerberus-Remote.
3. Select the 'Cerberus-Remote' tab in the detail editor.
4. Select the operation mode in the 'Permanent Cerberus-Remote access' field.
5. Load the configuration from the PC to the station.
a Permanent access is configured.
Figure 26: Configuring the operation mode for Cerberus-Remote
Indicating permanent access
The 'Indicate permanent Cerberus-Remote access' checkbox specifies whether
permanent access of Cerberus-Remote is indicated at the 'Station' with a message.
The following inputs / outputs are available on the periphery board:
'I/O': Configurable inputs / outputs (24 V)
'RT fire/NOT monitored': Connection of an ↑ RT channel for RT alarm
'RT fire/monitored': Monitored output for RT Alarm
'RT fault/NOT monitored': Connection of an RT channel for RT Fault
'RT fault/monitored': Monitored output for RT Fault
'Sounder/monitored': Monitored sounder output
These inputs and outputs are shown in the ↑ 'Hardware tree' under the 'Periphery
board' element.
You will find information on the settings in the detail editor of the inputs / outputs in
chapter 'Inputs/outputs [➙ 139]'.
If the output is assigned to the ↑ effect of a control, you can set additional
properties in the 'Control' tab of the detail editor. You will find a description of these
settings in chapter 'Properties of the assigned effect elements [➙ 180]'.
'Hardware' task card
10
Onboard I/Os
119 | 412
A6V10210424_j_en_--
2018-08-29

Advertisement

Table of Contents
loading

Table of Contents