Page 1
FDB221 Sinteso Addressable (FDnet) Detector bases and accessories Product Manual Overview The FDB221 addressable (FDnet) detector bases are universal bases suited for surface and recess mounting. Characteristics – Universal base, suited for surface and recess mounting – Extra-large mounting slots facilitate a re-use of existing drill holes resulting from other systems –...
Page 2
Application – For recess supply wiring – For surface supply wiring, cable diameter up to 6 mm Detector base height 22 mm Height with inserted detector 54 mm Mounting slots min. 46 mm to max. 79 mm Loop contact Screw less connecting terminals Opening for cable entry Ø...
Page 3
Detector heating FDBH291 – For the operation of the fire detectors in critical environments, danger of frost forma- tion or moisture condensation, e.g. in cold storage houses, attics, loading ramps, cheese storage cellars, etc. – Optimum function of the detector heating is only ensured with the base attachment humid FDB293 –...
Page 4
Base attachment humid FDB293 with seal – For higher IP category – For mounting in humid or wet environments – Detector base FDB221fixed with spring-loaded catch – When the detector heating unit is used Mounting holes 153.5 mm Detector base height 49 mm Height with inserted detector 87 mm Protective cages DBZ1194 –...
Detector dust cap FDZ291 – To cover the detector, for the protection against dust during construction work Technical data Detector bases FDB221 Conductor cross section Connecting terminals in detector base 0.2... 1.5 mm – Auxiliary terminals 1.0... 2.5 mm – Micro terminals 0.28...