Reporting/Logging And Monitoring; Release Notes - Siemens FS720 Configuration

Safety
2

Release Notes

2.4.3 Reporting/logging and monitoring

'Login/logout' person in the 'FS720' system via PMI with PIN
'Login/logout' person in the 'FS720' system via PMI with key
switch
'Login/logout' person in the 'FS720' system via FRT with PIN
'Login/logout' person in the 'FS720' system via FRT with key
switch
'Login/logout' temporary clients 'Cerberus Mobile', 'Cerberus-
Remote', 'Cerberus-Engineering-Tool' in the 'FS720' system
2.5 Release Notes
24 | 412
Building Technologies
Fire Safety
Monitor the network and the system.
l
'FS720' offers the follow security-relevant logging functions:
Table 1: Log files
* Security log files can be uploaded with 'Cerberus-Engineering-Tool' via
'Commissioning' > 'Upload site log files'.
See also
2 Loading the site log files to the PC [➙ 109]
Limitations to the configuration or use of devices in a fire detection installation with
a particular firmware version are possible.
WARNING
Limited or non-existent fire detection
Personal injury and damage to property in the event of a fire.
● Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
● Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
NOTICE
Incorrect planning and/or configuration
Important standards and specifications are not satisfied.
Fire detection installation is not accepted for commissioning.
Additional expense resulting from necessary new planning and/or configuration.
● Read the 'Release Notes' before you plan and/or configure a fire detection
installation.
● Read the 'Release Notes' before you carry out a firmware update to a fire
detection installation.
Logger Position Pre-configured
syslog opt/log* Yes
syslog opt/log* Yes
syslog opt/log* Yes
syslog opt/log* Yes
syslog opt/log* Yes
A6V10210424_j_en_--
2018-08-29