Expanding And Collapsing The Elements In The Structure Tree; Multiselection - Siemens FS720 Configuration
Fire detection system
Hide thumbs
Also See for FS720:
- Mounting & installation (248 pages) ,
- Commissioning, maintenance, troubleshooting (178 pages) ,
- Quick reference for components / pin assignment (130 pages)
Table of Contents
Advertisement
GUI
5
Expanding and collapsing the elements in the structure tree
5.9 Expanding and collapsing the elements in the
5.10 Multiselection
52 | 412
Building Technologies
Fire Safety
structure tree
An element with subtree can be expanded or collapsed according to functionality in
Windows Explorer.
Elements in the structure tree can be expanded and collapsed as follows:
●
Click on the buttons '+' or '–' next to a tree element.
●
Double-click on an element.
●
Highlight the element and press the right or left arrow key.
To expand or collapse all of the elements in a subtree, proceed as follows:
●
Highlight the element and press <*> or </> on the numeric keypad
●
Highlight the element and click on the '+' or '–' buttons on the upper right in the
structure tree.
Figure 6: Buttons for expanding and collapsing a subtree
Filtering the elements in the structure tree
The filter function is used to display certain elements when the structure tree is
expanded and collapsed. The search field for the filter function is located on the top
right of the tree structure next to the '+' and '–' buttons.
Character strings can be entered in the filter function search field. When the
structure tree is expanded and collapsed with the '+' and '–' buttons, only elements
containing the defined character string are displayed. The character strings entered
can contain the wildcard '*'.
Multiselection allows, e.g. entry of a customer text for several elements in one
procedure. Multiselection is possible in the table and in the tree view. Selecting one
or more lines corresponds to the Windows standard.
If several elements are selected in the tree view, nothing is indicated in the table.
The intersection of selected elements is displayed in the detail editor. If the
properties of the selected elements are different then the appropriate field is shown
in the detail editor by quadrates. Following multiselection, the tab name in the
detail editor is 'Multiselection'.
Figure 7: Multiselection
Because of dynamic loading you can select a maximum of eight 'Stations' in the
tree and table at the same time.
See also
2 Dynamic loading [➙ 60]
A6V10210424_j_en_--
2018-08-29
Advertisement
Table of Contents
