Siemens FS720 Configuration page 310

'Operation' task card
13
Integrating 'Cerberus PACE' system
310 | 412
Building Technologies
Fire Safety
6. Highlight the 'Visibility' element within the created 'Cerberus PACE' element.
7. Use 'Assign' to assign the visibility of the required parts of the fire detection
system to the 'Cerberus PACE' system. For example, this can be the station to
which the 'Cerberus PACE' system is connected.
Information: The 'Cerberus PACE' system only ever has visibility of the events
within the assigned zone of the fire detection system.
8. Optional: Highlight the assigned 'FC72x' station element under the 'Visibility'
element.
9. Optional: Adjust which events are visible for the 'Cerberus PACE' system in the
'Overview' tab. Presetting: The 'ALL event categories visible' property is
activated.
A6V10210424_j_en_--
2018-08-29