Siemens FS720 Configuration page 403

Fire detection system
Table of Contents

Advertisement

Pre-alarm
Stage before an alarm for information early on, should an event occur.
Pre-configuration
A sub-configuration of the hardware tree, detection tree, and control tree created before commissioning the
fire detection installation.
Router station
Participant in the SAFEDLINK sub-net for the connection between the SAFEDLINK sub-net and the
Ethernet sub-net (FCnet/C-WEB/LAN) via the Ethernet switch (modular) FN2012-A1.
RT
The abbreviation for remote transmission.
SAFEDLINK
Physical network of an FS20 / FS720 fire detection system with the network module (SAFEDLINK) and the
network cable.
SAFEDLINK station
Participants in the SAFEDLINK sub-net with local connection for the PC.
Section
Level in detection tree of the fire detection system. The section is assigned to the area. It is used for
combining zones.
Single-detector dependency
With single-detector dependency, the alarm decision depends on the danger level of one detector. The first
detector in the zone which detects the corresponding danger level, triggers the fire alarm.
Site
Depiction of fire detection installation: The top level in the figure showing the installed system. Combines
hardware tree, detection tree, and control tree.
Soft keys
Softkeys are buttons which you can use to carry out functions and which are displayed in the three fields of
the softkey line on the display. These three black fields contain the names of the functions in white font. The
functions of the softkeys change dynamically depending on the situation and the contents of the display.
Always the most important functions are assigned to the softkeys 1 and 2.
Standalone station
Standalone station with local connection for the PC.
Standby router station
Participant in the SAFEDLINK sub-net, in redundancy to the router station, for the connection between the
SAFEDLINK sub-net and the Ethernet sub-net (FCnet/C-WEB/LAN) via Ethernet switch (modular) FN2012-
A1.
Station
Unit for system control. Fire control panel or fire terminal.
Building Technologies
Fire Safety
Glossary
403 | 412
A6V10210424_j_en_--
2018-08-29

Advertisement

Table of Contents
loading

Table of Contents