Configuring The Extinguishing Card - Siemens FS720 Configuration

Extinguishing
16

Configuring the extinguishing card

16.2 Configuring the extinguishing card
346 | 412
Building Technologies
Fire Safety
7. Configure the forwarding of the extinguishing trigger state of a flooding zone to
an output according to EN 12094-1. Link [➙ 391]
8. Optional: Adapt or configure the global settings for extinguishing. Link [➙ 396]
This includes, for example, setting up the PIN for the extinguishing terminals.
See also
2 'Station' [➙ 116]
The 'Extinguishing card (XCI2005)' is a module bus card for extinguishing. It
contains the inputs and outputs required for controlling the extinguishing
components. In addition, the Extinguishing card (XCI2005)' can also activate fire
control components, such as door retainers, and external systems, such as a
ventilation system.
Creating and configuring the extinguishing card
w A 'Station' element is created.
1. Select the ↑ 'Station' element which requires integrated extinguishing in the
'Hardware' task card.
2. Create an 'Extinguishing card (XCI2005)' element for the flooding zone under
the 'Station' element.
This step can be missed out if the extinguishing card has already been
imported by the station.
a The tool creates an 'Extinguishing card (XCI2005)' element.
a The template automatically generates subordinate elements for
extinguishing terminals, as well as monitored and collective inputs and
outputs.
3. Enter the required customer text in the 'Overview' tab.
A6V10210424_j_en_--
2018-08-29