Siemens FS720 Configuration page 392

Extinguishing
16
Configuring the forwarding of the extinguishing released state
392 | 412
Building Technologies
Fire Safety
Configuring the forwarding of the 'Released' extinguishing state
The flooding zone for which the forwarding of the 'Released' state is to be
w
configured has already been configured. You will find information on
configuring the flooding zone in chapter 'Configuring flooding zone control
[➙ 354]'.
w An extinguishing reporting zone has already been configured for the flooding
zone. You will find information on configuring an extinguishing reporting zone in
chapter 'Configuring an extinguishing reporting zone [➙ 379]'.
w A 'Fire control group' element has already been created under the relevant
station in the 'Control' task card. You will find information on creating and
configuring a 'Fire control group' element and configuring 'Fire control'
elements in chapter 'Universal control group [➙ 182]'.
1. Highlight the following element in the 'Control' task card under the 'Station' with
integrated extinguishing: 'Fire control group'
2. Under the 'Fire control group' element, create a new 'Fire control' element with
the template ID '21 -- Exting. released / no OFF event'.
Information: This element is referred to as ''Fire control' element no. 1' below.
Information: This 'Fire control' element no. 1 records the 'Released' state of the
'Extinguishing reporting zone' element of the flooding zone and forwards it to
any output.
3. Highlight the new 'Fire control' element no. 1 in the control tree.
4. Amend the customer text in the 'Overview' tab if necessary.
5. Configure the 'Fire control' element no. 1 in the 'Details' tab according to the
''Fire control' element no. 1 for recording the 'Released' state' column in the
table later on in this chapter. Link [➙ 395]
6. Highlight the 'Causes' element under the 'Fire control' element no. 1.
A6V10210424_j_en_--
2018-08-29