Siemens FS720 Configuration page 194

'Control' task card
12
Evac control group
194 | 412
Building Technologies
Fire Safety
5. Assign the required events to the 'Causes' function with 'Assign', e.g., a fire
alarm in a detection area. Alternatively, you could also assign an input signal.
Tip: You can use multiselection to mark several events for an assignable
element and assign these as causes. You can also select predefined event
groups on the left side of the dialog under 'Grouped type selection'.
6. Configure all assigned causes within a 'Causes' element in the 'Overview' tab.
7. Assign one or more 'EVAC sounder' elements to the 'Effects' element with
'Assign'.
8. Configure the 'EVAC sounder' elements in the 'Overview' tab.
In order to navigate quickly to a particular device in the window 'New effect
dialog', you can activated the checkbox 'Use serial no. ("ID-Nr."):' and select the
serial number of the desired device from the drop-down list.
A6V10210424_j_en_--
2018-08-29