I/O Cards - Siemens FS720 Configuration

10.5 I/O cards

Building Technologies
Fire Safety
Operation mode 'Mains
supervision
enabled'
With battery √
backup
√
Without battery
backup
With an external –
DC power supply
unit
√
With redundant
supply
Table 4: Configuration of the power supply
√ Checkbox checked
– Checkbox unchecked
You will find the hardware configuration in document A6V10210416. See chapter
'Applicable documents'.
See also
2 Applicable documents [➙ 13]
I/O card (programmable) FCI2008-A1
The I/O card (programmable) FCI2008-A1 has 12 programmable inputs / outputs.
I/O card (remote transmission) FCI2007-A1
The I/O card (remote transmission) FCI2007-A1 has eight inputs / outputs for alarm
and fault transmission.
I/O card (horn/monitored) FCI2009-A1
The I/O card (horn / monitored) FCI2009-A1 has eight monitored outputs for alarm
and fault transmission.
You will find additional information on the I/O cards in document A6V10210368.
See chapter 'Applicable documents'.
Create I/O card
1. Select 'Hardware' > ↑ 'Station' in the task card.
2. Create the I/O card for the 'Station'. Link [➙ 68]
'Hardware' task card
'Battery 'Converter
supervision supervision
enabled' enabled'
√ √
– √
– –
√ –
10
I/O cards
Display delay
'Emergency
power delay',
'Enabled'
√ or –
–
–
√ or –
135 | 412
A6V10210424_j_en_--
2018-08-29