13 'Operation' task card
13.1 Global system configuration
13.1.1 System behavior
Building Technologies
Fire Safety
The 'Operation' task card contains the logical elements for the global system
configuration and for configuring the operation and indication units.
The element 'Global system configuration' is available once per ↑ 'Site' and
contains the following elements:
●
'Global behaviour'
●
'Global PIN configuration'
●
'Country settings'
●
'Global system time'
You will find information on this in the following chapters.
The 'Global behaviour' element contains the settings for the system behavior:
●
'Events': The event categories in the system are displayed with the
corresponding properties.
●
'Commands': The system commands are displayed with the corresponding
access levels.
Properties for 'Global behaviour' on the 'Overview' tab
'System wide isolation of all buzzers enabled'
This setting specifies whether the 'Buzzers' of all 'Stations' can be switched off
system-wide with a command.
'Operation' task card
Global system configuration
A6V10210424_j_en_--
13
255 | 412
2018-08-29