Installing/Mounting; Introduction; Installing Wireless Communication Module - Siemens SITRANS FM MAG 8000 IIoT Operating Instructions Manual

Installing/mounting

4.1

Introduction

The installation consists of the following steps:
1. Installing Wireless Communication Module (Page 15)
2. Installing rechargeable battery (Page 18)
3. Installing Antenna (Page 19)
Note
Wireless Communication Module ordered as spare part
If you have ordered the Wireless Communication Module as a spare part the FCC and IC label is
in an enclosed envelope. Stick the label somewhere on the enclosure.
4.2

Installing Wireless Communication Module

Note
Retrofit systems
The following procedure applies only to retrofit systems.
Note
SIM card replacement prohibited
Only use the SIM card provided by Siemens.
Note
MAG 8000 and Wireless Communication Modules are matching pairs
The Wireless Communication Module matches to the MAG 8000 it is delivered with. Upgrade kits
can only be paired with one MAG 8000.
SITRANS FM MAG 8000 IIoT Wireless Communication Module
Operating Instructions, 07/2022, A5E52070595A-AA
4
15