Table of Contents
Advertisement
Mounting
You will find detailed information on mounting the RF170C in an ET 200pro in the operating
instructions "ET 200pro distributed I/O device
(https://support.industry.siemens.com/cs/ww/en/view/21210852)".
Below is an overview of the installation steps.
3.1
Installing the interface module
Introduction
The interface module connects the ET 200pro to PROFIBUS DP / PROFINET IO and supplies
power to the RF170C.
Requirements
When using the interface module for PROFIBUS DP
• The terminating module is removed from the interface module.
• The rack has been mounted.
When using the interface module for PROFIBUS IO
• The terminating module is removed from the interface module.
• The SIMATIC Micro Memory Card is inserted (module dependent).
• The rack has been mounted.
SIMATIC RF170C
Operating Instructions, 02/2022, J31069-D0176-U001-A6-7618
3
21
Advertisement
Table of Contents
