Local Data Backup; Data Backup On Second Device - Siemens Synco RMZ792 Series Basic Documentation

Operating lines
Note
General
Operating lines
Operating lines
Notes
36/58
Siemens
Building Technologies
7.1

Local data backup

Main menu > Data backup > Local
Operating line
Restore
Save
Progress
Storage date
Storage year
Operating lines Save or Restore start copying the setting values. Progress is indicated
continuously [0...100%] and last about 15 seconds.
Information Storage date and Storage year only display meaningful values if the bus
operator unit at the time of data backup received a valid system time.
7.2

Data backup on second device

The second unit (second bus operator unit in the KNX network) can be located on
another area or line. Set the target address of the second device via the Address
submenu.
Main menu > Data backup > Second device > Address
Operating line
Area
Line
Device address
Main menu > Data backup > Second device
Operating line
Restore
Save
Progress
Operating lines Save or Restore start transfer of the setting values. Progress is indicated
continuously [0...100%] and may take up to 3 minutes.
• Following transfer, the settings must be enabled on the second device via Restore.
• Transferring the data to the second device overwrites the local data backup of the
device. Locally backed up data are lost! The date for the data transfer overwrites the
date of the local data backup.
• No involved bus operator unit may be switched off or unplugged during transfer to
prevent loss of data.
• The bus operator unit cannot be operated during data transfer. Data cannot be
backed up or restored simultaneously on the second device to avoid corrupting data.
• Note the following rule to avoid compatibility issues:
The software version of the second device (where the data is backed up) must
be identical or higher than that of the bus operator unit whose data is backed up.
Bus operator unit RMZ792 Series B
7 Data backup
Range
--- / Restored / Failed
--- / Saved / Failed
---- / 0...100%
01.01...31.12
2000...2080
Range
0...15
0...15
1...255
Range
--- / Restored / Failed
--- / Saved / Failed
---- / 0...100%
Factory setting
---
---
----
Date of last
storage
Year of last
storage
Factory setting
0
2
255
Factory setting
---
---
----
CE1P3113en
07.07.2011