Usb Storage Setup - GCC Technologies T500 User Manual

b. Directly connect the Laser machine and PC/Laptop using the RJ45 cable without any
router/switch..etc. in between, test PING and send files, if the files can be sent and the
result of PING is normal (can get response from destination IP), the Ethernet function of
GCC laser is normal, it should be something wrong in the LAN environment , ask the
administrator of the LAN to solve the problem.

4.2.3 USB Storage Setup

GCC laser engraver is built-in with USB storage port allow you to transmit data from USB flash drive.
You can format and use a USB flash drive as an USB storage of GCC laser engraver.
USB flash drive minimum requirements
 Windows FAT16/FAT32 file system format
 A maximum of 32G of storage capacity

Following are our certified brands for GCC LaserPro USB storage
Brand
HP
SanDisk
PNY
Kingston
Transcend
ADATA
Step 1. Make sure the page setup and orientation is match GCC LaserPro T500. Please refer to
Chapter 5.2.2 for page setup and orientation.
Step 2. Open the file in graphics software and click File  Print from menu bar, and the Print
window will appear
Size Format
16G
16G
8G
FAT32
8G / 16G
4G / 16G
8G / 32G
65 232002080G(09)