GCC Technologies T500 User Manual page 108

Machine Setting- Set Command Mode Page
The Set Command Mode Page allows you to configure vector settings when outputting in Default or
HPGL mode. Default mode is the standard Windows print driver recognized by the most popular
graphic software programs, such as CorelDraw, Photoshop, Illustrator, etc. Whereas, HPGL mode is
a less common output format generated from some RIP applications (signage industry). Regardless
of which format you will be working with, both output formats are supported.

Mode: Default / HPGL

Vector Pen: 1 - 16

Vector Speed: 0.0% - 100%

Vector PPI: 0.0% - 100%

Power Ramp: YES / NO
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
 /  Directional
Start / Stop
Set Command Mode Page
Back to previous page
Save your current settings
Scroll through the menu selections
Adjust the value for that selection
Back to Main Work Page
108
☼ Navigating to this page:
Main Work Page
Press F4
Functions Page
Select <Machine Setting>
from the menu
Machine Setting Page
Select <Set Command
Mode >
from the menu
Set Command Mode
Page
Function
232002080G(09)