GCC Technologies T500 User Manual page 166

Laser Professional AP
Currently, quite few laser professional application softwares like Laser Type, 3D studio, EngraveLab are available
in the market. You can not only create all kinds of vector images with these AP but also convert these vector
images into 3D module, which is a great way to produce 3D graphics.
As illustrated in the figure below, all you need to do is to choose the direction of the vector and then set the length
and shape of the convex or concave surface. The software will automatically generate the 3D graphic for you.
Concept illustration of 3D graphic production with Laser Professional AP
After the graphic is completed, you can output the 3D graphic directly to the laser machine through GCC LaserPro
driver, which is very handy. Or you can also export the 3D graphics as JPG or BMP format and edit with
frequently used CorelDRAW or Illustrator software, then output the graphic to GCC laser system.
Photoshop & CorelDRAW
The way to produce 3D graphics with Photoshop and CorelDRAW is very similar. Fill in the desired gray level
colors to each of the drawn figures, and proceed with further arrangement and combination. Then you may output
the 3D graphic to the laser for the production of the 3D object. Take the figure below as an example. After
producing two graphs in gray level, proceed with the arrangement and combination. Then you may let the laser
proceed with 3D mode.
Both Photoshop and CorelDRAW may produce 3D graphics in the manner of combination.
166 232002080G(09)