Table of Contents
Advertisement
The resolution and depth of these halftone areas can be adjusted with the DPI setting found on the
Options page. Please note that selecting the Black & White mode will add a new Raster page to the
menu. The Black & White mode dithering settings can be changed from the Raster page. (Please
refer to the Raster section below for details). Experiment with different dithering settings to attain the
desired results.
TIP
The Black & White mode interprets the processed image by the varying colors and
shades. For the best results, we suggest you convert the image to a grayscale image
with your graphics software prior to engraving in the Black & White mode.
NOTE
Selecting the Black & White mode will enable the Raster page on the LaserPro T500
Print Driver, allowing you to adjust advanced stamp-related settings.
Manual Color Fill:
allows a maximum of 16 pen parameters to be set. It will help user to set different parameters
easily in one file.
Specify laser type to different color pens. The GCC LaserPro print driver
134
232002080G(09)
Advertisement
Table of Contents
