Table of Contents
Advertisement
3D Mode:
3D Mode allows the naked eyes to visualize the curvatures of the 3D effect by applying 200
grayscale power level technology to create different depth of engraving.
Stamp Mode:
engravers by applying 200 power leve to create different steps.
NOTE
Selecting the Stamp mode will enable the Stamp page on the T500 Print Driver, allowing you to
adjust advanced stamp-related settings.
Raster & Stamp Mode:
Raster & Stamp mode combines the 256 level gray scale image processing technology and 200
power level stamp steps production requirement to create slopes.
DPI (Option Page)
DPI (dots-per-inch) represents the number of times the laser will fire over a one-inch path. This setting
determines the image resolution and quality when performing raster engraving functions. Higher DPI
settings result in cleaner and deeper engravings, but require more time to complete. Lower DPI settings
result in coarser and shallower engravings, but require less time to complete. The LaserPro T500 offers 8
The stamp mode is one of the more dynamic functions of the LaserPro laser
Select this mode when you would like to engrave image on stamps. The
[DEFAULT SETTING: 500]
135
232002080G(09)
Advertisement
Table of Contents
