Routine Cleaning; Cleaning The Inside Of The System; Cleaning The Work Table And Motion System; Lubricate The Motion System - GCC Technologies T500 User Manual

*The recommended lens cleaner is Eclipse Cleaning System Solution from Photographic Solutions
or HPLC grade Methanol. Search "Eclipse Cleaning System Solution" on Amazon or eBay website
to get this solution locally.
Solution/dp/B0000AUR1I

8.2 Routine Cleaning

8.2.1 Cleaning the inside of the system

Open the front cover, and the shoulder cover. Use a vacuum cleaner to clean the inside of the
machine thoroughly.

8.2.2 Cleaning the work table and motion system

Clean the working table and the motion system on a weekly basis through the following steps:
1) Turn the power off and unplug the laser machine before cleaning.
2) Use a vacuum cleaner with a flexible nozzle to remove dust and debris from the worktable, scrap
drawer and motion system.
3) Apply small amounts of all-purpose cleaner, alcohol, or acetone to a paper or cotton towel to
clean the working table.
4) Apply a soap solution, all-purpose cleaner, or alcohol to a paper or cotton towel to wipe down the
rails of the motion system.
5) Wait for all cleaning residue to dry completely before plugging in and operating the laser system.
CAUTION

Never pour or spray alcohol or acetone directly to the working table.

Oil, alcohol and acetone can cause fires or smoke build-up if improperly used.

8.2.3 Lubricate the motion system

In order to keep the motion system running smoothly, the X / Y rails of the motion system will need
lubrication on a weekly basis. Use a small amount of light grade machine grease to a paper or cotton
towel and apply to the rails.
http://www.amazon.com/Photographic-Solutions-ECDCS-Cleaning-
Eclipse Cleaning System Solution
183 232002080G(09)