Operating Procedure For Water Cooled Model (150/ 200W) - GCC Technologies T500 User Manual

1.7 Operating Procedure for Water Cooled Model (150/ 200W)

* Follow the turn-on and turn-off procedure is REQUIRED to prevent 150/ 200W
laser source from condensation.
Standard Turn-on Procedure:
1. Turn on the laser purge air compressor to make sure that air inside of laser source dry
2. Turn on water chiller and ensure laser source temperature steady.
3. Until water chiller temperature reach specified temperature, turn on the GCC laserPro T500
machine.
Standard Turn-off procedure:
1. Turn off laser machine power
2. Turn off water chiller
3. Until laser source temperature return to ambient air temperature and ensure air inside the laser
source dry, then turn off the purge air compressor.
15 232002080G(09)