GCC Technologies T500 User Manual page 115

Machine Setting-LAN Setup Wizard Page
The LAN Setup Wizard Page allows you to connect the laser machine with ethernet to
transmit files from computer to laser machine for processing jobs. When selecting the DHCP
to <ON>, the network is set tup to dynamic IP address, the IP address will automatically
retrieve from network; while DHCP <OFF> is to apply static IP address, and you need to
further enter the IP address, MASK, and GATE information. Using Left or Right directional
keys under dynamic IP setting page to scroll between different columns to enter the address,
and use Up or Down keys to change the numbers.
•
DHCP: NO/ OFF
Please refer to Chapter 5.2.1 for ethernet connectivity setup in Windows driver.
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
 /  Directional
LAN Setup Wizard Page
Back to previous page
Save your current settings
Cycle DHCP between NO/ OFF, or move between
tabs on IP address settings
Scroll between menu options, or change the
numbers of IP address settings.
115
☼
Navigating to this page:
Main Work Page
Functions Page
Machine Setting Page
LAN Setup Wizard Page
Function
232002080G(09)
press F4
Select<Machine
Setting>from the menu
Select<LAN setup
wizard> from the menu