Smartpoint - GCC Technologies T500 User Manual

4.1.6 SmartPOINT

LaserPro T500 SmartPOINT is a nice design for users to locate material when working on repeat jobs.
With four red beam pointers, everyone can easily place the material right on the same place as they
did before.
1) After completing the first job, do not remove your work on the table.
2) Manually adjust the SmartPOINT red beam pointers to a specific place that is easy for you to
aim on for continuous jobs.
3) Remove your first work piece and load new piece.
4) You can easily take the red points as reference and know where your job is going to be
processed.
39
Manually adjust
SmartPOINT as
reference of next
job.
232002080G(09)