GCC Technologies T500 User Manual page 109

Machine Setting-Set File Save Mode Page
The Set File Save Mode Page allows you to set whether or not the LaserPro T500 automatically
deletes each job file after processing. Setting File Save to <NO> will automatically and immediately
delete each job file from the LaserPro T500 after the engraving or cutting process. Setting File Save
to <YES> will retain all job files on the LaserPro T500, even after each job has been processed.

File Save: YES / NO
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
Start / Stop
Set File Save Mode Page
Back to previous page
Save your current settings
Cycle File Save between YES / NO
Back to Main Work Page
109
☼ Navigating to this page:
Main Work Page
Press F4
Functions Page
Select <Machine Setting>
from the menu
Machine Setting Page
Select <Set File Save
Mode > from the menu
Set File Save Mode
Page
Function
232002080G(09)