2) Under the Style pull down menu, select COLOR MANAGEMENT OFF.
3) Click OK to complete the color management adjustments.
5.2.4 Using the LaserPro T500 Print Driver
Now after you have properly set the Page and Layout and Color Management of your graphics software,
you are ready to configure the details of your actual job through the LaserPro T500 Print Driver. The
LaserPro T500 print driver allows you to adjust your engraving / cutting options. After you have setup your
image, design, or text to be engraved in your software application, you can access the LaserPro T500 print
driver by going to FILE PRINT PROPERTIES.
131
232002080G(09)