GCC Technologies T500 User Manual page 146

Raster Checked
Raster Unchecked
Air (Pen Page)
This checkbox controls the SmartAIR air-assist function (if you have the optional air compressor installed).
By selecting a pen color and checking this box will enable the SmartAIR air-assist function for that
particular pen color. As an example, if you are performing a combination of both surface raster engraving
job and deep vector cutting on a material such as acrylic, you may want to enable the SmartAIR air-assist
for the vector cutting sections to get the cleanest cuts. To do this, you would simply need to select the pen
color that you have assigned to the sections to be cut and select the Air checkbox for those particular pen
colors.
Defocus (Pen Page) [DEFAULT SETTING: Unselected]
This checkbox enables users to set the Defocus or out of focus distance for a particular job. With the
Defocus button checked, the Spirit Series will use the entered focus distance when performing the auto
focus procedure before starting the job. This feature allows users to use out of focus engraving techniques
when working with different types of materials. Note that the Defocus distance is set by the different pen
colors.
Bridge Cutting (Pen Page)
Checking the Bridge Cutting checkbox will allow users to easily create perforation lines (dash-line).
Once seethe line color along with another corresponding pen can be used in tandem to indicate the
Vector Checked
Processes both Vector and Raster
functions for that particular color
Processes only the Vector functions
for that particular color (Raster
functions ignored)
[DEFAULT SETTING: Unselected]
[DEFAULT SETTING: Unselected / 0.0 mm]
146
Vector Unchecked
Processes only the Raster functions
for that particular color (Vector
functions ignored)
Does not process Vector or Raster
functions for that particular color
232002080G(09)