GCC Technologies T500 User Manual page 113

Machine Setting- Vector Mode Page
The Vector Mode Page allows you to adjust and balance vector mode's quality and speed settings
based on your specific job. Speedy Vector Mode offers the highest output speed, sacrificing quality.
Whereas Quality Vector Mode offers the highest quality, sacrificing output speed. Keep in mind that
speed and quality are usually at a tradeoff. The system's default is Fine Vector mode, sacrificing
some speed for higher quality.

Modes: Quality, Production, Speedy
(Slower speeds / higher quality ---------- Faster speeds / lower quality)
Please reboot the machine after click <SAVE> button for machine to apply new settings.
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
 /  Directional
Start / Stop
TIP
Enable Smoothing will be most evident when processing small, fine, intricate designs which
Vector Mode Page
Back to previous page
Save your current settings
Cycle Set Vector Mode between QUALITY VECTOR /
FINE VECTOR / COARSE VECTOR / SPEEDY
VECTOR
Select between Vector mode and Smoothing
Back to Main Work Page
113
☼ Navigating to this
page:
Main Work Page
Press F4
Functions Page
Select <Machine
Setting> from the
menu
Machine Setting
Page
Select <Vector Mode>
from the menu
Vector Mode Page
Function
232002080G(09)