GCC Technologies T500 User Manual page 102

File Edit Raster Page
The File Edit Raster Page allows you to edit the raster power and speed settings, as well as enable or
disable SmartACT for the selected job. These settings correspond to the same settings found on the
LaserPro T500 print driver. This page allows you to easily adjust these values to make immediate
adjustments while processing your loaded jobs, even when you have disconnected your computer
from the LaserPro T500.

Raster Power: 0.0% - 100%

Raster Speed: 0.0% - 100%

SmartACT: YES / NO
Relevant Buttons
F1 (Back)
 /  Directional
 /  Directional
Start / Stop
☼ Navigating to this page:
File Management Page
File Management Edit Page
File Edit Raster Page
Back to previous page
Scroll through the menu selections
Adjust the value for that selection
Back to Main Work Page
102
Main Work Page
Press F4
Functions Page
Select <File Management>
from the menu
Select <System File> from
the menu
System File Page
Select a job file and
press Enter
File Information Page
Press F4
Select <Raster Setting>
from the menu
File Edit Raster Page
Function
232002080G(09)