GCC Technologies T500 User Manual page 110

Machine Setting-Set Standby Mode Page
The Set Standby Mode page allows you to configure the laser machine automatically enter into power
saving if machine is idle for a specified time.
When entering into the Set Standby Mode function, you can use Left or Right arrow keys to scroll
between <Enable> or <Disable> the function. The Time function is to determine after how long the
laser machine is idle, it will enter in power saving automatically. The default time is 4 minutes. The
Enter Standby function will turn the machine into power saving immediately after selected.
•
Standby: Enable/ Disable
•
Time: 4-30 mins. (Default 4 mins.)
•
Enter Standby: YES/ NO
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
Start / Stop
Set Standby Mode Page
Back to previous page
Save your current settings
Cycle Standby between YES / NO
Back to Main Work Page
110
☼ Navigating to this page:
Main Work Page
Press F4
Functions Page
Select <Machine Setting>
from the menu
Machine Setting Page
Select <Set Standby
Mode > from the menu
Set Standby Mode Page
Function
232002080G(09)