GCC Technologies T500 User Manual page 118

Machine Setting-Other Page
The Other Page allows you to change various settings that correspond to the control panel. The
Language setting will allow users to change available languages displayed by the control panel. The
Unit setting will allow you to change whether the units displayed by the control panel is in the metric
or imperial system. The EOF (end of file) Alarm setting will enable or disable an audible notification
when your jobs are complete. The Air Delay setting allows you to specify the delay in seconds of the
SmartAIR air-assist after the point of laser firing.

Language: ENGLISH (others dependent on Firmware)

Unit: METRIC / IINCH

EOF Alarm: YES / NO

Air Delay: 1-100 seconds
TIP
Depending on the material you are engraving with, your laser settings, and the desired
results, please experiment with the air delay to achieve your desired results.
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
 /  Directional
Start / Stop
☼ Navigating to this page:
Main Work Page
Machine Setting Page
Other Page
Back to previous page
Save your current settings
Scroll through the menu selections
Adjust the value for that selection
Back to Main Work Page
118
Press F4
Functions Page
Select <Machine Setting>
from the menu
Select <Other> from the
menu
Other Page
Function
232002080G(09)